Red Paddle Co | 12'6" Elite MSL Inflatable Paddle Board Package

Description

These inflatable SUPs are long and narrow, which means they are lightning-quick through the water but also very easy to manoeuvre, control, glide and ride. Being inflatable they pack-down and can be easily transported to...

Full-on fast: shaped for maximum speed and race-winning efficiency.
Superb stability: square-tailed volume for confident paddling, tight turns, and comfort in tough conditions.
Race-ready rigidity: built in MSL®800 double-drop-stitch with RSS battens for incredible stiffness at minimal weight.
Firm footing: superior grip and comfort underfoot, providing a solid base for a full-power stroke.
Training partner: flat bungees, bottle holder, and M6 accessory mount.
Complete package: Titan II pump, RSS battens, coiled leash, US box race fin, in a Transformer ATB bag.

At Red, sustainability isn’t just marketing hype – it’s at the core of what we do. As a certified B Corp (www.bcorporation.net) we champion high standards of social and environmental performance, transparency, and accountability.

Fundamentally, our boards are designed and built to last. Our quality-assured Tec-Air process has a negligible warranty rate. Maximum longevity minimises our impact on the planet.

Yet even durable Red kit will eventually reach end-of-life, hence our ‘design for disassembly’ approach. For example, all Titan pump components are replaceable, while using 100% recoverable virgin plastic in our fins, finboxes and RSS battens ensure they’re fully recyclable.

Our manufacturing processes, like turning the offcuts from our EVA deckpads into keyrings, aim for zero waste too, reflecting our commitment to low-impact resource selection.

Before storing, rinse all equipment in fresh water and let it dry completely.

To pack away, lay the deflated board deck-up and place the pump across the nose, leaving enough room to wrap the board over. Roll tightly, then secure with the strap. Use the backpack’s internal strap to secure the board inside.

Store your board in a cool, dry place, out of direct sunlight. If keeping it rolled up, avoid excess pressure on the straps. If space allows, it’s best to store the pump separately.

You can also leave your board inflated, ideally kept on a flat surface or upright – but do reduce the board’s pressure to below 15psi if not in use for a while.

What is MSL®? Safe. Stiff. Durable.

Monocoque Structural Laminate or MSL® is the world’s leading drop-stitch material. Exclusive to Red Paddle Co boards, it’s made to our exact specifications.

Monocoque: meaning the coating is integral to the structure. MSL® drop-stitch technology integrates a highly durable, reinforced coating to the ultra-high-definition weave to form an inseparable base layer.

Structural: the high-tensile drop-stitch fibres are designed to withstand pressures in excess of 22psi, meaning Red boards can be inflated to provide unrivalled stiffness and confidence, no matter the rider weight or prevailing conditions.

Laminate: the reinforced composite coating is bonded to the textile core using machine welding that applies heat and pressure to the inner PVC layer, saving over 2kg of adhesives and reducing cosmetic and safety concerns. Produced under low tension, this process creates a torsional stiffening effect when the boards are inflated, making MSL® stiffer at lower pressures.

Min experience: Advanced

Max weight: 265lbs

Rider style: Racing

Description

These inflatable SUPs are long and narrow, which means they are lightning-quick through the water but also very easy to manoeuvre, control, glide and ride. Being inflatable they pack-down and can be easily transported to races all over the world. Despite its practicality, there's no compromise on performance.

Raised rails allow the rider to dig their feet into the board. This will give a grounded stance meaning more energy can be channelled into each paddle stroke.

All Elite boards feature unique innovations which can be found on Red Paddle Co boards: The patented Rocker Stiffening System or RSS for short, counters flex with two stiffening battens that are inserted into pockets on the side of the board; Forward Flex Control System (FFC) then stiffens the front section of the board using a carbon compression strut to remove flex that can be created in a race and channels this towards the back of the board increasing overall board speed.

The two combined work together to create the fastest inflatable SUP's currently available on the market. The board also features double nose fins to aid tracking and displacing water from the deck of the board. The glass fibre centre fin supplied as standard gives the right amount of grip without adding drag, whilst the angled design prevents any debris from getting stuck on the fin.

Multiple carry handles are included to provide fast entry and exit of the water and have been designed not to get in the way during racing. The diamond cut, Red embossed deck pad provides ultimate grip in control in all stages of a race.

The 28’’ wide Elite is the perfect entry board to racing or those over 240lbs, also if the majority of your racing is done on the open ocean then the stability offered by the 28’’ Elite allows you to focus more on putting the power down than staying balanced.

Introducing a total redesign of our all terrain backpack that offers a bagless carry system. This skeleton system means you can access more remote waterways without the need for a bulky bag and just take the straps and your pump. When using the bag, large all terrain wheels make handling rugged terrain a breeze and considered anthropometric design is able to be fully customised to your height so you can take maximum care of your body while under load.

Large exterior pockets can fit any quick to grab essentials and velcro interior pocket means your paddle blade is safe and secure. The interior material has a stylish Red repeater pattern and its water resistance will minimise any intrusive damp. Additional internal storage for small items and keeping your service kit on hand.